Freeze Wraps
  • Protect the liquids located within from freezing
  • Mildew & UV resistant vinyl with polyester fiber filament
  • Temperature Rating; -40°F to 300°F
  • Works best when paired with heat trace products
  • R-13 Value Freeze Protection
Thermal Wraps
  • Protects and keeps the heat away from compressor engines
  • Impregnated fiberglass base fabric with specially formulated silicone rubber compound and ceramic fiber filament
  • Temperature Rating; up to 500°F
  • Added options allow for higher temperature ratings


Acoustical Wraps
  • Mildew & UV resistant vinyl with MLV and polyester fiber filament
  • Temperature Rating; -40°F to 180°F
  • Standard STC 26-30 dB
  • EZ design uses a standard “Hook & Loop” style securing system


Exhaust Wraps
  • Assists with state and federal regulation compliance
  • Increases VOC (Volatile Organic Compound) which allows the exhaust to burn cleaner
  • Eliminates heat loss through pipe transmission
  • Keeps engine components and personnel protected from the heat of the exhaust

Our Products

EZ Pipe Wraps provides the highest quality (yet affordable) freeze and thermal protection for the Oil and Gas industry. Our EZ Pipe Wraps are made with the finest materials & built to last; they withstand the elements and protect workers from injury. Take a look at our below series of wraps to determine your best solutions.

Flat Wrap

Flat Wraps are designed to be used around straight pieces of pipe and pro-vide a very tight wrap which helps with the insulating & increases efficiency


90° Wrap

90° Wraps are designed to easily and efficiently form around bends in the pipe as well as provide full coverage over unions



Tee & Valve Wrap

Tee & Valve Wraps are designed to insulate around pipe brackets and valves while still allowing the equipment to be fully operational. The “wings” located in the middle of the wrap al-low for maximum coverage no matter where the valve handle is positioned

Cuff Wrap

Cuff Wraps are designed to cover the seam where two pieces of wraps join together to provide total encapsulation of the piping.

Spiral Wrap

Spiral Wraps are designed to easily be manipulate to form an insulation layer around large pieces of production equip-ment such a tanks, where typical wraps will not work.



HoodE Wrap

HoodE Wraps are designed, small and large, to be used instead of typical pipe wraps to allow easier access to the following examples:

  • Well Heads
  • Meter Run Charts
  • Pneumatic Valves
  • Plungers

SnuggE Wrap

SnuggE Wraps are designed to be the most versatile wraps and the quickest to install. The SnuggE Wrap covers straight pipe as well as angler pieces.

Exhaust Wrap

Exhaust Wraps are designed to better transfer the engine heat through the exhaust muffler which results in increased engine efficiency. During the summertime, the Exhaust Wraps contains the heat inside the muffler and transfers the heat from the engine outside the enclosure. The wrap also provides added safety by covering the mufflers hot surface metal.


Click Here for Field Measurement Study


1763 N Main St
Weatherford, TX 76085


800 Imperial Ind Park Dr
Oakdale, PA 15071


623 E 18th Street
Greeley, CO 80631

Toll Free: 888.412.5553   |   Fax: 817.594.4472